分享理念

Looking for alternative refrigerants to R-410A @ Heat Pump Summit in Nuremberg

Late 2017. “What is the replacement refrigerant for R-410A” is the question that perhaps more than any other is being asked in the HVAC industry. This is a consequence of other factors, such as: how much will R410A cost in the next semester ? Will it continue to be so difficult to source as has been the case for the last few months? Personally, I tried to find a response by participating...
Read More About Looking for alternative refrigerants to R-410A @ Heat Pump Summit in Nuremberg »

ATMOsphere Ibérica: how to cool when it’s really hot?

With an outdoor temperature of 26°C on 24 October, it could be said that the weather in Madrid was in line with the main focus of the first ATMOsphere Ibérica event: the challenges of natural refrigerants in warm climates. “Climatic conditions in Spain, Portugal and Latin American make the transition to natural refrigerants, in particular CO 2 , more difficult”, stated Alvaro de Oña, the...
Read More About ATMOsphere Ibérica: how to cool when it’s really hot? »

How can I choose the right humidification system for a paint booth?

This is the third and final discussion on paint booth applications. If you haven’t read the previous ones yet, please don’t forget to check them out! Today I’m going to talk about the best humidification solution for this specific application.  First of all, there is no one overall best solution, rather it depends on the requirements of each individual installation. A good...
Read More About How can I choose the right humidification system for a paint booth? »

Why does humidity need to be controlled in the printing industry?

Paper is a hygroscopic material that tends to reach a condition of equilibrium with the temperature-humidity conditions of the surrounding environment. Any swings in temperature and humidity can cause dimensional variations and loss of paper flatness . These phenomena are well-known to those who work in the printing industry as, if not appropriately controlled, they can...
Read More About Why does humidity need to be controlled in the printing industry? »

Relative humidity inside paint booths: what causes deviations from optimum conditions?

Paint booths are closed, air-conditioned spaces in which the ambient conditions are kept at the ideal values to ensure both a high quality finish of the coated surfaces and safety of the personnel working inside . Temperature, humidity and cleanliness of the air are ensured by an appropriate ventilation system . The conventional solution is an “all outside air” ventilation...
Read More About Relative humidity inside paint booths: what causes deviations from optimum conditions? »

How will commercial refrigeration develop in the future?

Undoubtedly, the expansion of commercial refrigeration is likely to continue due to the growing importance of food preservation . The food chain from “ field to fork ” must be able to guarantee food quality and safety , and above all for fresh products with a short shelf-life this can only be ensured by low temperature transport and storage, so as to prevent bacterial growth: indeed, ...
Read More About How will commercial refrigeration develop in the future? »

Eureka Roadshow Italy

On September 15, 2017, the Eureka Roadshow Italy , organised by EPEE and EVIA, with Centro Studi Galileo as its partner and CAREL and ZIEHL-ABEGG as sponsors , was held at the nh Laguna Palace Hotel in Mestre (Venice). The purpose of the event was to share the conclusions of Eureka 2016 (The Hague, 13/12/2016) with an audience of manufacturers, industry associations, consultants,...
Read More About Eureka Roadshow Italy »

The Future of HVAC 2017 by AIRAH

The Future of HVAC Conference , held over the past 5 years, has become the must-attend conference of the year. Industry leaders explore the advances, ideas, and innovations that are driving our industry’s future. The discussions encompass not only new HVAC technologies and materials, but advances in future design processes, HVAC and smart grids, net-zero buildings, big data, and...
Read More About The Future of HVAC 2017 by AIRAH »

Why does the printing industry require humidity control?

In order to ensure an efficient process and excellent and consistent quality of the printed product, the temperature and humidity in places designed for the storage and printing of paper and cardboard needs to be controlled appropriately. What are the effects on paper? The hygroscopic nature of paper Paper is a hygroscopic material that tends to reach a condition of...
Read More About Why does the printing industry require humidity control? »

Why does air relative humidity affect the quality of coatings?

The application of coatings on a surface is a process that is affected by the relative humidity of the surrounding environment. The speed and intensity of the reactions that generate the protective film are dependent on air conditions. This is even more the case when using water-based paints or powder paints , which are increasingly widespread in industrial processes due to their low VOC...
Read More About Why does air relative humidity affect the quality of coatings? »
Showing 1 - 10 of 43 results.
Items per Page 10
of 5

目录

查找更多

 

 

Bloggers

Biagio Lamanna
posts: 4
Date: 11/16/17
Miriam Solana Ciprés
posts: 13
Date: 11/9/17
Andrea Pagan
posts: 3
Date: 11/2/17
Sofia Coin
posts: 2
Date: 10/26/17
Luigi Nalini
posts: 1
Date: 10/12/17
Raul Simonetti
posts: 5
Date: 10/5/17
Anthony Harrigan
posts: 1
Date: 9/28/17
Serena Ometto
posts: 2
Date: 8/24/17
Enrico Boscaro
posts: 2
Date: 7/27/17
Roberto Sandano
posts: 1
Date: 7/6/17